The Creality Space Pi Filament Dry Box Plus dries the filament during the printing process, ensuring that the material does not absorb moisture under the influence of external environmental factors. This prevents stringing, clogging, poor adhesion or layer shifting and ensures excellent quality.
Design with capacity for two filament spools
The dry box can hold two spools, each weighing 1kg. The dryer is equipped with 4 filament holes and PTFE tubes to dry the filaments of two 3D printers at the same time.
Double 360° hot air heater with PTC heating technology
For even heating, the dry box is equipped with a fan that circulates the hot air at a 360° angle to effectively dry damp filaments. The system is supported by a long-lasting and energy-saving 110-watt PTC heating element.
LCD touch screen
The Creality Space Pi Filament Dry Box Plus is equipped with a 4-inch touchscreen for easy operation and monitoring of drying conditions. The drying countdown, the real-time temperature and the real-time humidity can be tracked on the display.
One-key set for 12 filament types with 48 hour timer function
The filament dry box has 12 different temperature settings for different filament types. The temperature can be freely adjusted between 45 °C and 70 °C. The heating duration can also be freely adjusted from 0 to 48 hours.
| Material type | Recommended temperature | Recommended heating time |
| PLA, PLA-CF | 50°C | 4–8 h |
| TPU, PP | 55°C | 4–8 h |
| ABS, ASA, PC | 65°C | 8–12 h |
| PETG, PET, PETG-CF | 60°C | 4–8 h |
| PA, PA-CF | 65°C | ≥ 12 h |
Power-off memory function
In the event of an unforeseen power outage, the device can be easily restarted as it remembers the previous material and temperature settings.
Other features:
- Compatible with 1.75mm and 2.85mm filaments,
- Supports high-speed 3D printers and filaments from the Hyper series (recommended),
- Easy switching between °C and °F,
- Safety through power switch,
- Moisture-proof silicone plug,
- Double compartment for desiccants for drying when switched off,
- Input voltage of 220V 50/60Hz, rated power of 260W.
Suitable for spools with a diameter of 20 cm and a width of 7.7 cm.
