Creality Standard Resin White is an open-source resin designed for any UV-curing SLA or DLP system.
- Excellent value for money.
- High Precision
- High-Cost performance
- Smooth finish
- Good Fluidity
- Short curing time
- Wide Compatibility
- Low Viscosity & Good Fluidity
Creality Standard Resin White has good fluidity which improves the success rate by reducing resin release and adhesion. In addition, it helps keep the machine clean.
With high printing accuracy and low shrinkage rate, the model feels delicate with a smooth surface and sharp details.
Creality Standard Resin White is a high-performance resin from Creality. It offers improved material properties and improved finish on details with and faster curing times.
This resin works with LCD-based UV resin printers working at 405nm. It is designed with a fast curing time, high stability, and low shrinkage. The result of this is accurate and smooth parts that can be used in various applications. This resin is specifically designed for the Creality range of 3D printers but it can also be used on other LCD resin printers, like the Anycubic, Wanhao, Elegoo, Phrozen, Geetech, Nova3D, and Sparkmaker 3D printers.
Creality Standard Resin White comes in a strong metal bottle which keeps all light away from the resin and is very well packaged in protective plastic bubble wrapping inside the box.
Specifications:
- Curing frequency: 405nm
- Shelf life: 12 Months
- Hardness: 60-68 Shore D
- Bending Strength: 90-95 MPa
- Viscosity (@25℃): 300-400cps
- Shrinkage: 3.5 – 4.2%
- Heat deflection Temperature: 85℃
Storage instructions:
- Keep away from light. (Sunshine contains a lot of UV light, it will solidify photosensitive resin).
- It is recommended to store at 15℃ – 35℃ ambient temperature; the lower the temperature, the higher the viscosity of the resin. Keep resin sealed during storage. Excessive dust or moisture can affect print quality.
Usage instructions:
- Shake well before use; some resins do contain sediment which will settle to the bottom of the container.
- Wear gloves during use to avoid direct contact with skin and keep the room well-ventilated (must be nitrile gloves, NOT LATEX)
- In the event of contact with skin, rinse with running water. If you feel unwell, seek medical attention.
- Printed models need to be cleaned with a high-concentration alcohol (IPA) to clean the printed part for about 30s (recommended concentration of 95% or more, the higher the better). Water-washable resins can be washed off with water.
- Do not pour the resin into a resin vat which contains unused resin. The resin in the vat can be dirty and pollute the new resin.
- Do not leave the resin in the resin vat for a long period without use to avoid resin pollution affecting the printing quality. Rather pour the clean unused resin into a light-blocking container. Resin has a shelf life of up to 18 months.
