The BIQU Panda Breath is three tools in one: an active chamber heater, a HEPA air purifier, and a filament dryer.
Printing engineering materials like ABS, ASA, PC, or PA-CF in an enclosed printer often means fighting warping, poor layer adhesion, and unpleasant fumes. The BIQU Panda Breath tackles all three at once, replacing the need for separate heating, filtration, and drying accessories.
Active Chamber Heating — Reduce Warping & Cracking
Featuring a 300W PTC heater, the BIQU Panda Breath delivers fast, uniform heat to the print chamber, strengthening layer adhesion on engineering filaments (ABS, ASA, PC, PA-CF, PAHT-CF, PET-CF, PPA-CF, PPS, PPS-CF, and more) and improving first-layer adhesion even with everyday filaments. The result: flatter parts with visibly less warping compared to unheated chambers.
Active Air Purification — Healthy, Safe Printing
A dual HEPA + activated carbon filtration system actively pulls air from the chamber, capturing VOCs and fine particulates before expelling clean air back out, enabling odour-free printing that’s safer for you and your household.
Built-In Filament Drying
No need for a separate filament dryer. Switch the BIQU Panda Breath into drying mode while your printer is idle, and it circulates warm air around your spools to pull moisture out of filament, saving space and equipment cost.
Smart, Hands-Off Operation
Set your target thresholds once through the web-based control panel: target chamber temperature, filter fan activation temperature, and heater activation temperature, and the BIQU Panda Breath handles the rest. It monitors your printer’s bed temperature in real time and automatically starts heating and filtration when the bed hits your preset trigger, no manual intervention required.
Safe and Durable
Dual hardware and software safeguards protect against thermal runaway, and the unit is validated to keep chamber temperature within safe limits across supported printers. It is housed in a fully earthed, powder-coated sheet-metal frame built to last.
BIQU Panda Breath Compatibility:
- Fully compatible: Bambu Lab P2S, P1S, P1P, X1C
- Compatible with Bambu Lab A1 when paired with BIQU’s Panda Shelter enclosure
- Klipper-based printers (Snapmaker U1, Voron, and others) are supported, though initial firmware requires manual heating control.
BIQU Panda Breath Technical Specifications
| Spec | Detail |
|---|---|
| Dimensions | 175.5mm × 44mm × 278mm |
| Heating power | 300W |
| Max chamber temperature | 60°C |
| Min operating ambient temperature | 15°C |
| Input voltage | 100–240V AC |
| Connectivity | Wi-Fi 2.4GHz |
| Control methods | Web UI / physical buttons / BIQU App |
| Shell material | Full metal body, powder-coated, grounded design |
| Filter | HEPA + activated carbon composite |
| Suitable materials | ABS, ASA, PC, PA-CF, PAHT-CF, PET-CF, PPA-CF, PPS, PPS-CF, and other engineering materials |
What’s in the Box
- BIQU Panda Breath unit × 1 (with 1 filter cartridge pre-installed)
- Packaging box ×1
- 250V 10A 0.3m C14-to-C13+C13 power cable × 1
- Aluminium foil thermal insulation cotton × 2
- Cable clips × 2
- 2.5mm hex key × 1
- M3 flange nut × 1
- M3×8 socket head cap screw × 1
- M3×8 flat-head self-tapping screw × 1
